The safe way to remove iron fallout
Iron fallout is the hidden enemy of flawless paintwork and sparkling wheels. Tiny metallic particles from brake dust, industrial pollution and road grime embed themselves into your car’s finish – where they oxidise, rust, and cause lasting damage. The solution is Nielsen Fallout Remover. A pH-neutral fallout remover that’s strong enough to dissolve contamination yet gentle enough to protect your wax, sealant, or ceramic coating.
What is iron fallout and why remove it?
Iron fallout comes from airborne metal particles, rail dust and brake dust. Over time, these particles bond to paint and alloys, forming tiny rust spots. If ignored, fallout pits and corrodes your clear coat, leaving a rough surface even after washing. Standard shampoos can’t remove it, and harsh acidic cleaners can strip wax or damage sensitive finishes.
Why choose Nielsen Fallout Remover over others?
- Safe decontamination with zero harsh acids or alkalis
- Professional-grade results for home users
- Clear visual feedback – see where it’s working
- Available in 500ml or 5L – perfect for both enthusiasts and trade use
- Trusted by professional detailers who demand a safe but effective iron remover
Nielsen Fallout Remover gives you a perfectly clean surface, fast. Its advanced formula reacts instantly with iron contamination, turning purple as it dissolves the problem before your eyes. And because it’s pH-neutral, it’s safe for:
- Waxed or sealed finishes
- Ceramic coatings and PPF
- Painted or anodised alloys
- Delicate trim and carbon fibre
Ideal use cases
Decontamination Prep
Before polishing or ceramic coatings.
Routine Maintenance
Safe for monthly or bi-monthly upkeep without harming protective treatments.
Wheel Care
Effective for maintaining alloy wheels prone to brake dust.
Mixed-Surface Situations
Great for cars with varied materials – paint, PPF, plastic trims, carbon fibre, etc.
How it works
1. Clings to surface
The formula is engineered to adhere longer to surfaces, maximising dwell time for a deeper clean.
2. Chemical reaction & colour change
Upon contact with embedded iron, the formula reacts and turns deep purple, providing a visible indicator of contamination being dissolved.
3. Iron dissolution
The active chemistry breaks the bond between oxidation particles and the vehicle surface. This allows iron to be safely rinsed away without aggressive mechanical scrubbing.
4. Rinse & reveal
After dwelling, the iron particulates are rinsed off using fresh water or snow foam. Wheels should be jet-washed to flush all residue.
How to use Nielsen Fallout Remover
Fallout Remover is designed to dissolve and safely remove invisible iron contamination from your paint, wheels, glass, and trim. Follow this step-by-step guide for professional-grade results every time.
 | Preparation |
| Cool surface: Always work on a cool, dry surface and out of direct sunlight to prevent streaking or premature drying. Pre-wash: If your vehicle is visibly dirty, wash it first with a pH-neutral shampoo to remove loose dirt and grime. Fallout Remover is for contamination, not heavy dirt removal. Protect sensitive areas: Avoid spraying directly onto unpainted brake components or bare metal – rinse immediately if contact occurs. | |
 | Application – PAINTWORK |
| Spray generously onto the paintwork, working panel by panel. Allow 3–5 minutes for the formula to react with iron particles – it will turn purple as it dissolves contamination. Do not let the product dry. In warm conditions, work in smaller sections to keep the surface wet. For heavy contamination, lightly agitate with a soft microfibre cloth or detailing sponge. | |
 | Application – WHEELS |
| Spray directly onto the wheel face, inner barrels, and spokes. Wait for the visible purple reaction to develop. For stubborn brake dust, agitate with a soft wheel brush. Rinse thoroughly with clean water. | |
 | Rinsing |
| Rinse thoroughly with a strong stream of clean water, starting from the top down. Ensure all residue is removed from paint, wheels, and any crevices. | |
 | Finishing touches |
| Repeat on heavy contamination if necessary. For the smoothest possible finish, follow with a clay bar treatment to remove any remaining bonded contaminants. Apply wax, sealant, or ceramic coating to lock in protection. |
💡 Tip: Use every 3–6 months depending on driving conditions.
💡 Tip: Ideal before waxing, sealing, or ceramic coating for maximum bond strength.
💡 Tip: Work panel-by-panel for even coverage and reaction time.
💡 Tip: For multi-stage details, use Fallout Remover after your pre-wash but before claying or polishing.
💡 Tip: Always wear gloves to protect your hands during application.
Ready to get started?
Let your car do the talking. Nielsen Fallout Remover – the ultimate iron remover for enthusiasts, detailers, and anyone serious about keeping their car looking its best.
Questions? Let’s chat.
📧 Email us: info@nielsenchemicals.com
📞 Call: 01283 530011
📱 Follow us on social for how-tos, new product drops, and more! Facebook, Instagram, TikTok, YouTube, X, and LinkedIn!
